Comparing the performance of single and multifrequency Kelvin probe force microscopy techniques in air and water

• Jason I. Kilpatrick,
• Emrullah Kargin and
• Brian J. Rodriguez

Beilstein J. Nanotechnol. 2022, 13, 922–943, doi:10.3762/bjnano.13.82

• the surface potential [53][76][86] and has enhanced our understanding of perovskite solar cells [10][87][88] and patch potentials in the Casimir force [89][90]. Implementations of Het-KPFM to date have primarily focused on the measurement of the first harmonic of the electrostatic force [57][58

Atomic layer deposited films of Al₂O₃ on fluorine-doped tin oxide electrodes: stability and barrier properties

• Hana Krýsová,
• Michael Neumann-Spallart,
• Hana Tarábková,
• Pavel Janda,
• Ladislav Kavan and
• Josef Krýsa

Beilstein J. Nanotechnol. 2021, 12, 24–34, doi:10.3762/bjnano.12.2

• ), at sites that were not covered by the semiconductor, was blocked. This blocking layer (also called electron-selective layer) is a key component of dye-sensitized [19] and perovskite solar cells [21]. The blocking function consists in supporting vectorial electron transport from a photoexcited light

Implementation of data-cube pump–probe KPFM on organic solar cells

• Benjamin Grévin,
• Olivier Bardagot and
• Renaud Demadrille

Beilstein J. Nanotechnol. 2020, 11, 323–337, doi:10.3762/bjnano.11.24

• -processed organic donor–acceptor blends called bulk heterojunctions (BHJ), for polycrystalline direct bandgap semiconductors such as CdTe, CuInxGa(1−x)Se2 and Cu2ZnSnS4 and for hybrid organic–inorganic perovskite solar cells. Whatever material used, improving the performance of the solar cell requires a

Recent progress in perovskite solar cells: the perovskite layer

• Xianfeng Dai,
• Ke Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2020, 11, 51–60, doi:10.3762/bjnano.11.5

• Xianfeng Dai Ke Xu Fanan Wei School of Information & Control Engineering, Shenyang Jianzhu University, Shenyang, China School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou, China 10.3762/bjnano.11.5 Abstract Perovskite solar cells (PSCs) are set to be game changing

• , paving the way for their commercialization. In the closing section of this review, some future critical challenges are outlined, and the prospect of commercialization of PSCs is presented. Keywords: coating techniques; perovskite layer; perovskite solar cells (PSCs); perovskite structure; photovoltaic

• been developed into solar cells, photodetectors and light-emitting diodes (Figure 1). In OIHP photovoltaics, perovskite solar cells (PSCs) have entered our field of vision. With their high efficiency and low cost, they are expected to be highly influential in next-generation photovoltaic technology. In

Polyvinylpyrrolidone as additive for perovskite solar cells with water and isopropanol as solvents

• Chen Du,
• Shuo Wang,
• Xu Miao,
• Wenhai Sun,
• Yu Zhu,
• Chengyan Wang and
• Ruixin Ma

Beilstein J. Nanotechnol. 2019, 10, 2374–2382, doi:10.3762/bjnano.10.228

• and Technology Beijing, Beijing 100083, PR China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials, Beijing 100083, PR China 10.3762/bjnano.10.228 Abstract The recent years have witnessed a fast-paced development of perovskite solar cells (PSCs). Unfortunately, the

• 0.1 cm2. The PCE continued to be over 80% of the initial PCE after 60 days of storage. FInally, the introduced PVP-doped PSCs present a low-cost and low-toxicity way to commercialize perovskite solar cells. Keywords: additive; lead nitrate aqueous solution; low-toxicity process; perovskite solar

• 2018, a world record was set by Jingbi You et al., who presented perovskite solar cells with an efficiency of 23.3% [9]. Perovskite solar cells can be flexibly constructed from crystals of different components with different groups, which represents a vital advantage [2][10][11][12][13][14]. As one of

Nontoxic pyrite iron sulfide nanocrystals as second electron acceptor in PTB7:PC₇₁BM-based organic photovoltaic cells

• Olivia Amargós-Reyes,
• José-Luis Maldonado,
• Omar Martínez-Alvarez,
• María-Elena Nicho,
• José Santos-Cruz,
• Juan Nicasio-Collazo,
• Irving Caballero-Quintana and
• Concepción Arenas-Arrocena

Beilstein J. Nanotechnol. 2019, 10, 2238–2250, doi:10.3762/bjnano.10.216

• inside the CdS/CdTe inorganic heterojunction improved the conversion efficiency of the PV device by up to 8% [19]. Moreover, FeS2 has also been used in perovskite solar cells as a hole transport layer (HTL) to reduce the fabrication cost, reaching efficiencies of up to 11.2% [20]. On the other hand, OPVs

• hybrid solar cells, as hole transport layers in perovskite solar cells, and as a second electron acceptor in OPVs. For instance, when slightly spherical iron pyrite NPs of 10–25 nm size were used as acceptors in P3HT-based solar cells, very poor PV parameters were attained [10][14][15][61]. When

• implemented as second electron acceptors in P3HT:PCBM solar cells, the current density increased from 6.69 to 7.63 mA/cm2 using a concentration of only 0.3 wt % FeS2 with respect to the acceptor [18]. Furthermore, FeS2 NPs have been used as a HTL in CdS/CdTe and perovskite solar cells [19][20], among other

Kelvin probe force microscopy work function characterization of transition metal oxide crystals under ongoing reduction and oxidation

• Dominik Wrana,
• Karol Cieślik,
• Wojciech Belza,
• Christian Rodenbücher,
• Krzysztof Szot and
• Franciszek Krok

Beilstein J. Nanotechnol. 2019, 10, 1596–1607, doi:10.3762/bjnano.10.155

• superior for many cases in both fundamental research and applications, such as the identification of adsorption geometries of molecules on oxide surfaces [7], probing energetics of electron transfer within single molecules [8] and operation of prototypical electronic devices, such as perovskite solar cells

Know your full potential: Quantitative Kelvin probe force microscopy on nanoscale electrical devices

• Amelie Axt,
• Ilka M. Hermes,
• Victor W. Bergmann,
• Niklas Tausendpfund and
• Stefan A. L. Weber

Beilstein J. Nanotechnol. 2018, 9, 1809–1819, doi:10.3762/bjnano.9.172

• cross sections of a range of different solar cell devices, including organic [3][4][5], and inorganic [6] as well as hybrid perovskite solar cells [7][8][9][10][11][12][13][14][15]. In the course of one of our KPFM studies on a cross section of a perovskite solar cell under operating conditions [7] we

Multimodal noncontact atomic force microscopy and Kelvin probe force microscopy investigations of organolead tribromide perovskite single crystals

• Yann Almadori,
• David Moerman,
• Jaume Llacer Martinez,
• Philippe Leclère and
• Benjamin Grévin

Beilstein J. Nanotechnol. 2018, 9, 1695–1704, doi:10.3762/bjnano.9.161

• Solar Cells by Complementary Characterization Techniques (StableNextSol)”. D.M. is grateful to FRS-FNRS for a post-doctoral fellowship. Ph.L. is a Senior Research Associate of FRS-FNRS (Belgium).

• (BELSPO-PAI VII/5), the FRS-FNRS PDR Project “Hybrid Organic/Inorganic Nanomaterials for Energy COnversion and STOrage Devices on FLEXible and Stretchable Substrates (ECOSTOFLEX)”, and MP 1307 COST Action “Stable Next-Generation Photovoltaics: Unraveling Degradation Mechanisms of Organic and Perovskite

Semi-automatic spray pyrolysis deposition of thin, transparent, titania films as blocking layers for dye-sensitized and perovskite solar cells

• Hana Krýsová,
• Josef Krýsa and
• Ladislav Kavan

Beilstein J. Nanotechnol. 2018, 9, 1135–1145, doi:10.3762/bjnano.9.105

• function of the negative electrode of dye-sensitized and perovskite solar cells, the deposition of a nonporous blocking film is required on the surface of F-doped SnO2 (FTO) glass substrates. Such a blocking film can minimise undesirable parasitic processes, for example, the back reaction of photoinjected

• properties that were not influenced by post-calcination. These results will surely find use in the fabrication of large-scale dye-sensitized and perovskite solar cells. Keywords: blocking films; FTO; solar cells; spray pyrolysis deposition; titanium dioxide; Introduction Dye-sensitized solar cells (DSSCs

• ), solid state dye-sensitized solar cells (SSDSSCs) and perovskite solar cells (PSCs) are attractive alternatives to solid state photovoltaics at competitive cost. The general concept of a DSSC is based on a liquid junction photo-electrochemical cell with a nanocrystalline TiO2 photoanode that is

Synthesis and characterization of two new TiO₂-containing benzothiazole-based imine composites for organic device applications

• Anna Różycka,
• Agnieszka Iwan,
• Krzysztof Artur Bogdanowicz,
• Michal Filapek,
• Natalia Górska,
• Damian Pociecha,
• Marek Malinowski,
• Patryk Fryń,
• Agnieszka Hreniak,
• Jakub Rysz,
• Paweł Dąbczyński and
• Monika Marzec

Beilstein J. Nanotechnol. 2018, 9, 721–739, doi:10.3762/bjnano.9.67

• architectures were investigated [19][20][21][22][23][24][25][26][27][28][29][30][31][32][33]. However, the bottleneck of these devices is still the low power conversion efficiency (PCE), which is currently not satisfactory for application. The highest reported value of PCE for perovskite solar cells based on